Plumbing problems are often a major headache with water or sewer leaking everywhere and you running around in a panic trying to figure out what to do. This is especially true if the problem results in a Flooded Basement. Flooding is usually the result of a few different plumbing problems, but the end results are always a mess for you to clean up and if the basement is finished, and many of them are today, then this problem could be disastrous. First and foremost, if the problem is due to a fresh water leak then you need to disable the water supply. This simple step could save you a lot of money on clean up and repair.
In some cases you can diagnose the problem yourself. However, this usually requires the help of a friend or a loved one when you need to turn on the water to locate a leak. This is because it is always a good idea to be able to turn it off quickly when required. In most cases a fresh water leak is the result of a broken pipe. Piping can break from old age, pressure in the pipes making them shift and rub on wall studs or floor joists or even rubbing against each other if the home was badly plumbed. These repairs are often easy to fix when the pipes are accessible, but hidden pipes may require a little demolition to access.
Another cause of a Flooded Basement is a broken sump pump. Sump pumps are used when the home is built over a high water table or the soil contains excess moisture. This system uses what is termed as a French drain. The drain is designed so that all of the walls have a trench against the edges. This trench is under the floor and is sloped so it drains towards one corner of the room into a cistern or sump. The sump is then drained by pump which pushes the water outside the home. In normal circumstance this should never be a problem, but if the pump fails or the drain pipe clogs then your basement might flood. Visit the website at Website domain. Like us on Facebook.